Your Position: Home > Product > Mn-Cu alloy

锰铜皮

Update: 2021/4/8      View:
  • Brand:    中国
  • Type:    厚度最小0.08mm宽度最大100mm
  • Order Online
Introduction


Mn

Ni

Fe

Si

Cu

S

C

P

11-13

2-3

<0.5

<0.1

余量

<0.020

<0.05

<0.005

重要性能参数

电   阻  率ρ                  0.47μΩ·m

电阻温度系数                   α20  ±10×10-6/℃-1

线 膨 胀 系数                  18.1×10-6/℃-1 (20~100℃)

密       度                    8.4 g∕cm3

熔        点                   960℃

抗 拉 强  度                   490~539mpa

延   伸   率                   25%

对铜平均热电动势率             Ёcu≤1 uV/℃

最高允许工作温度               300℃ Manganese copper alloy (6j12, 6j8, 6j13, manganin)


Main uses


Manganin 6j8, 6j12 and 6j13 are superior precision resistance alloy materials because of their small resistance, temperature coefficient, low electrothermal potential to copper, high resistance stability and high resistivity. It is widely used in precision measurement of voltage, current and resistance, bridge and potentiometer, ammeter, voltmeter and other electrical instruments indicating these quantities, as well as winding resistor, shunt resistor and sliding resistor in measuring, indicating, regulating and recording instruments. In addition, it is more suitable for the standard resistor with a certain nominal resistance value and used as a reference. In addition, manganese copper and copper nickel are also heating wires of low temperature heating elements. For example, air-conditioned train bus box heating, household heating appliances.


The supply status is generally soft, or hard or semi hard according to the needs of users;


The supply specification can also supply special shape and size (plate, strip, bar, block) alloy materials according to the requirements


Chemical composition (%)

More Products